|
 |
 |
|
| FINGERPRINTING PROPERTIES HDPE GEOMEMBRANE (Made from Chevron PHILLIPS Resin) | ||
| Density (ASTM D1505) - | .938 gm/ cc (resin) .947 gm/ cc (sheet) minimum 0.940 | |
| Melt Index (ASTM D1238) - | .11 gm/ 10 min (resin) .15 gm/ 10 min (sheet) maximum 0.4 gm/10 min | |
| High Load Melt Index Ratio - | 110 (resin) | |
| Carbon Black (ASTM D1603) - | Typical- 2.4% (sheet) Minimum  2% | |
| DSC Melt Point - | 126 deg C. .15 gm/ 10 min (sheet) minimum | |
| Note: Resin is natural (wo/ carbon black) | ||
| |
|
|
 |
|
 |
| Home | Products | Technical | Company Info | News | FAQ | Site Map | Contact Us | Español |
Poly-Flex, Inc. • 2000 W. Marshall Dr. • Grand Prairie, TX 75051 U.S.A. • 888-765-9359
© Poly-Flex, Inc. • All Rights Reserved