SS Geocomposite (Metric) - Data Sheet (Metric Units)


HDPE DRAINAGE NET METRIC UNITS

		Minimum Average Values
Property	Test Method	GN - 200	GN - 250


Thickness	ASTM D 5199	5.1 mm	6.3 mm

Density, min.	ASTM D 1505	0.940 g/cc	0.940 g/cc

Carbon Black Content	ASTM D 1603	1.5 - 3.0%	1.5 - 3.0%

Tensile Strength (peak, MD)	ASTM D 7179	7.9 kN/m	10.5 kN/m



Transmissivity, (MD)	ASTM D 4716	1.0 x 10^-3 m²/sec	1.5 x 10^-3 m²/sec

metal plate/ net/ metal plate		(62 I/min•m)	(89 I/min•m)

hydraulic gradient, i = 1

normal pressure = 480 kPa seat time = 15 minutes



Roll Dimensions

1. Roll Width		4.27 m	4.27m

2. Roll Length		99.0 m	83.8 m

3. Roll Area		422.7 m²	357.7 m²


The above property values, unless otherwise specified, are the minimum acceptable average test results for any roll based on the specified test methods and do not refer to an individual test specimen. This data is provided for informational purposes only and is not intended as a warranty or guarantee. Poly-Flex, Inc. assumes no responsibility in connection with the use of this data. These values are subject to change without notice. REV. 11/06