HDPE Drainage Net English Units


HDPE DRAINAGE NET ENGLISH UNITS

		Minimum Average Values
Property	Test Method	GN - 200	GN - 250


Thickness	ASTM D 5199	200 mils	250 mils

Density, min.	ASTM D 1505	0.940 g/cc	0.940 g/cc

Carbon Black Content	ASTM D 1603	1.5 - 3.0%	1.5 - 3.0%

Tensile Strength (peak, MD)	ASTM D 7179	45 lb/in	60 lb/in



Transmissivity, (MD)	ASTM D 4716	5.0 gal/ min·ft	7.2 gal/ min·ft

metal plate/ net/ metal plate

hydraulic gradient, i = 1

normal pressure = 10,000 lb/ft² seat time = 15 minutes



Roll Dimensions

1. Roll Width		14 ft	14 ft

2. Roll Length		325 ft	275 ft

3. Roll Area		4550 ft²	3850 ft²


The above property values, unless otherwise specified, are the minimum acceptable average test results for any roll based on the specified test methods and do not refer to an individual test specimen. This data is provided for informational purposes only and is not intended as a warranty or guarantee. Poly-Flex, Inc. assumes no responsibility in connection with the use of this data. These values are subject to change without notice. REV. 11/06