Poly-Flex, Inc. offers both single and double-sided geocomposite with drainage net thicknesses of 5 and 6.25 mm (200 and 250 mils) and fabric weights ranging from 4 to 12 ounces per square yard. Rolls are 13.5 feet wide at the drainage net, with 6 inches of fabric overlap on each side. Rolls vary in length depending on the thickness of the materials.

Poly-Flex geocomposites consist of Poly-Flex drainage net with nonwoven geotextile fabric heat bonded to one or both sides. The geotextile provides gas venting, drainage, and filtration by retaining silt and soil particles while allowing gas and liquids to flow through. The geotextile also provides bonding of the geocomposite to textured liners, to enhance the interface friction angle on steep slopes. The drainage net provides planar flow of fluids or gases along the plane of the net. As with all Poly-Flex products, the Poly-Flex Manufacturing Quality Control and Quality Assurance Program ensures that only the highest quality products represent the Poly-Flex name. (Please refer to the QA/QC Manual located under the Technical section of this web site.) For more information, call our technical support staff at 888-765-9359. Or, request a quote by clicking here.

Versatility - Poly-Flex composites can be installed on steep slopes or against vertical walls where conventional drainage aggregates cannot be used.

High Coefficient of Friction - Poly-Flex geocomposites provide significantly higher interface friction angles when used in conjunction with Poly-Flex textured geomembranes.

Chemical Resistance - Since the Poly-Flex drainage net is made from the same resin used in the HDPE geomembranes, it exhibits the same resistance to chemical and biological attacks.

Reduced Traffic - Poly-Flex geocomposites require a fraction of truckloads of aggregate necessary to cover the same area.

Ease of Installation - The drainage net layers are overlapped and tied while the geotextile layers are either sewn, tacked or overlapped as dictated by project specifications.